LiteStride is an economical dust-free arena footing that eliminates the need for watering, reduces maintenance requirements, and provides a supportive, responsive riding surface for both horse and rider.

-Pure Silica Sand: distinctively angular sourced sand which retains is structural
integrity throughout the lifespan of the footing.

-Synthetic Fibers: virtually eliminates tracking by creating a root-like lattice
structure that is both flexible and resilient.

-Wax: A lower percentage of wax coating still creates a completely dust-free
footing with little to no maintenance requirements.

Download the indoor installation guide (PDF).

Download the outdoor installation guide (PDF).



Generally an arena sub-base should be built as similar to a road base as possible; Meaning it should be close to 100% compacted, have sufficient drainage, and most importantly be impervious to grinding horse hoofs that can cause considerable damage. Following are guidelines- only guidelines because no two situations are alike.

***Indoor arena instructions begin at # 3. Arena surface for indoor should be laser leveled and 100% compacted.***

Step-by-Step Installation Instructions:

1 . Choose a site that drains well and if possible has a natural slope for both drainage and to prevent “off site” infiltration. Consider prevailing wind and breezes. Also consider the noise, dust, and constant activity that may cause problems for others.

2 . Measure the site and remove the organics. Grass and soil will turn to muck after a good rain. You do not want this contaminating your arena.

3 . When you have reached a solid layer such as clay. Have the arena compacted, laser leveled, and then sloped to insure the proper drainage. Consider the natural site drainage. The water has to have a place to go.

***Depending on how much you have removed from the site you will need to build back up with a compactable aggregate. Check locally for the best products. This is an inexpensive way to build your subsurface back up to ground level.

4 . Next you will add 3/8” limestone screenings. This layer will take a beating from your horses’ hooves. This needs to be as close to 100% compacted as possible and laser leveled. Depending on the traffic in your arena the screenings should be approximately 4-6” deep. It may also be called stone dust. Check with your local quarry. There are many different names for similar aggregates. This layer can’t break up and render your footing too deep.

5 . An optional layer of “soil separation” fabric can be laid under the last level of
screenings. You are now ready for your Arena Footing. The LITESTRIDE®
Footing should be spread at an appropriate depth for your discipline and usage level in the arena evenly, and compacted with, at minimum, a 10-ton vibrating roller. Lift by lift the LITESTRIDE® will need to be laser leveled to all corners and compacted evenly. You will experience better cushion and firmer footing, with no dust, and minimal maintenance. Enjoy a safe and resilient footing for years to come.

NOTE: These are general guidelines only. Please consult a local professional for site-specific recommendations. IGK Equestrian, LLC assumes no responsibility for the suitability of these recommendations to your arena.