We get many questions about what our footing is made up of so I thought I would take a few minutes and explain the components of our footing and why we use such components. Each of our footings has their own special formula. (I’m not going to give you the secret recipe though, sorry!) Let’s take a look at what’s inside.
Our TruStride footing is composed of rubber granules, synthetic fiber blend, wax and pure silica sand. LiteStride is made up of a synthetic fiber blend, wax and pure silica sand. The new Equi-Blend footing has the same components as LiteStride, but less fibers and less wax, which minimizes the cost. And our 5K Ranch footing is composed of pure silica sand and wax.
Let’s start with explaining our rubber granules. The rubber comes that we get comes from a factory that manufactures shoes. When shoes soles are created, there is a mold that they are in, once the shoes soles are cut out, there is excess material that is considered a waste to this factory. This waste is ground up and delivered to us as small rubber granules, making this 100% recycled post-industrial material. We chose to add rubber granules to our TruStride footing to give it the extra cushion needed for high jumping disciplines, busy barns, or thoroughbred tracks.
Our synthetic fiber blend that we use is made up of premium recycled fibers also making this ingredient a 100% recycled post-industrial material. We chose to use synthetic fibers because they do not break down over time. The fibers in our footing create a lattice like effect, holding the footing together and allowing it to “give” a little while still creating a stable surface.
The most important components of our footings, and what keeps it dust free is our wax that we use. There are plenty of other options that are used in footings to coat the material and keep it dust free, both natural and synthetic. The logic behind this choice was the longevity of wax. Our oldest footing is 14 years old and is still going strong. Wax does not break down and decompose like other binders. It is a top of the line wax that we have never had a problem with and love working with!
The pure silica sand is the last but not the least. We have spent a lot of time finding the perfect sand for our blend. The sand that we chose is subangular sand. Normal sand has lots of different shapes and angles. When this type of sand is put into an arena, the sand angles on the sand particles will eventually be worn down, creating dust in your arena, and also causing your surface to not be as stable as it once was. Subangular sand has been partially worn down so that there are some small angles but most of it is rounder. By using sand like this, the smaller angles allow the sand to get nice and tight together while still allowing room to move. It creates the perfect stability that we wanted for our footing.
We’ve spent many years in research and development before we came to have the perfect recipe for our footing. That’s why our footing is the best dust free footing on the market! Feel free to contact us and ask for a sample so you can visualize the different components that are used.